ATRONICS INTERNATIONAL, INC.

IDE-2015PL

 Data bus:                  32-bit VL-bus

 Size:                      Three-quarter length, half-height card

 Hard drive supported:      Two IDE(AT) drives

 Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

                    Function                             Location

  40-pin IDE(AT) connector                                 CN1

  34-pin cable connector - floppy drive                    CN2

  10-pin serial port 2 - internal                          CN3

  10-pin serial port 1 - internal, 9-pin                   CN4
  serial port 1 external

  16-pin game port                                         CN5

  25-pin parallel port - external                          CN6

  4-pin connector - drive active LED                       JP9

                        USER CONFIGURABLE SETTINGS

              Function
                                          Location
                                                              Setting

  »
      Factory configured - do not
      alter
                                            JP1
                                                               open

  »
      Factory configured - do not
      alter
                                            JP2
                                                               open

  »
      Factory configured - do not
      alter
                                            JP3
                                                               open

  »
      Factory configured - do not
      alter
                                            JP4
                                                               open

  »
      Factory configured - do not
      alter
                                            JP5
                                                                N/A

  »
      Factory configured - do not
      alter
                                            JP6
                                                                N/A

  »
      Factory configured - do not
      alter
                                            JP7
                                                                N/A

  »
      Factory configured - do not
      alter
                                       JP8/pins 1 & 2
                                                              closed

  »
      Floppy drive interface
      enabled
                                      JP10/pins 1 & 2
                                                              closed


      Floppy drive interface
      disabled
                                      JP10/pins 2 & 3
                                                              closed

  »
      Serial port 1 enabled
                                      JP11/pins 1 & 2
                                                              closed


      Serial port 1 disabled
                                      JP11/pins 2 & 3
                                                              closed

  »
      Parallel port is LPT1
                                      JP12/pins 1 & 2
                                                              closed


      Parallel port is LPT2
                                      JP12/pins 2 & 3
                                                              closed

  »
      Game port enabled
                                      JP13/pins 1 & 2
                                                              closed


      Game port disabled
                                      JP13/pins 2 & 3
                                                              closed

  »
      Serial port 1 is COM1
                                      JP14/pins 1 & 2
                                                              closed


      Serial port 1 is COM3
                                      JP14/pins 2 & 3
                                                              closed

  »
      Parallel port enabled
                                      JP16/pins 1 & 2
                                                              closed


      Parallel port disabled
                                      JP16/pins 2 & 3
                                                              closed

  »
      Serial port 2 enabled
                                      JP17/pins 1 & 2
                                                              closed


      Serial port 2 disabled
                                      JP17/pins 2 & 3
                                                              closed

  »
      Serial port 2 is COM2
                                      JP18/pins 1 & 2
                                                              closed


      Serial port 2 is COM4
                                      JP18/pins 2 & 3
                                                              closed

  »
      Factory configured - do not
      alter
                                      JP19/pins 2 & 3
                                                              closed

  »
      Factory configured - do not
      alter
                                      JP20/pins 2 & 3
                                                              closed

  »
      Factory configured - do not
      alter
                                            JP21
                                                               open

  »
      IDE interface enabled
                                      JP22/pins 1 & 2
                                                              closed


      IDE interface disabled
                                      JP22/pins 2 & 3
                                                              closed